Forum Activity for @brian

brian
@brian
03/03/18 08:35:45AM
10,158 posts

Ensure APCu functions have been enabled in your PHP install
Design and Skin Customization

I can see in this that $_SERVER['REMOTE_ADDR'] and $_SERVER['SERVER_ADDR'] are different, so that's good - that means YOUR ip address is not coming in as the server address. So I think your online users _should_ be good. Do you still only see 1 online user?
brian
@brian
03/03/18 08:14:39AM
10,158 posts

Tag and image links still apply long after being deleted
Using Jamroom

lornawebber: Unfortunately the way it is now, I can't take images off the review list by deleting the tag. Is there an easier way?

If you cannot remove a tag, then that is a problem - we don't want to spend time trying to develop a workaround - we need to figure out why tags aren't removing. I have tested removing tags here and don't see any issues, so I need to know an image where you have added the "nolink" and it's not been removed (or still showing in a search for "nolink").

Thanks!
brian
@brian
03/03/18 07:57:24AM
10,158 posts

Profile Tweaks & Solo Pro Skin Problem.
Using Jamroom

It looks like this was fixed in version 1.0.9 of the Solo Pro skin - I've just updated the Marketplace - update to that and you should be good.
brian
@brian
03/03/18 07:36:26AM
10,158 posts

Preventing accidental deletion of my Forum Profile / disable delete button
Design and Skin Customization

I actually did it from the command line - but yes - you would just go into the set you want to restore from (i.e, the hour and time you want to restore from), put a checkmark in all the PROFILE and FORUM tables, then restore. Then run an integrity check and reset caches.
brian
@brian
03/03/18 07:26:35AM
10,158 posts

Ensure APCu functions have been enabled in your PHP install
Design and Skin Customization

So this is where it can get more complex depending on your setup. Since you are only seeing 1 user, it means the IP address for all your visitors is the SAME, which means your web server is not forwarding the IP address of the user over to your PHP install as $_SERVER['REMOTE_ADDR'] - so you need to have your web admin ensure the remote ip address is coming through. If the web server is behind any kind of proxy, then the HTTP_X_FORWARDED_FOR header needs to be set as well.
updated by @brian: 03/03/18 07:26:51AM
brian
@brian
03/03/18 06:36:32AM
10,158 posts

Ensure APCu functions have been enabled in your PHP install
Design and Skin Customization

derrickhand300:Thanks Brian
The issue seems to be something in my /store folder. When I shut it off my main public.html site goes down
I am seeing a Fatal Php error in the /store logs- not sure why the store would take down the main site- but I will work on that php php error
Thank you

Yeah - I saw your error log post before you edited it, and it was issues coming from the /store directory, so glad you found that.

Thanks!
brian
@brian
03/03/18 06:35:46AM
10,158 posts

System Tools Errors
Installation and Configuration

These binaries have been specifically compiled to work on a very wide range of Linux OS's and versions, so no - we can't provide them in a different format. That answer also does not explain why it is working on one of your sites and not the other if they are on the same server?
brian
@brian
03/03/18 06:34:33AM
10,158 posts

Tag and image links still apply long after being deleted
Using Jamroom

lornawebber:This issue needs a bit of explanation...
I have noticed that when tags are deleted from an image, those tags are still associated with that image long after they have been removed. The image will be presented in a search even if those tags were removed from the image weeks ago.
I discovered this because we require artwork images to have a photo reference link and I have been tagging "nolink" for those that don't. When I search "nolink" to follow up on these images, I get ones that have since been corrected and had that tag removed.

I've tested the tag deleting here, and I'm not seeing any issues. Is it specific tags that you are seeing this for?

Quote:Similarly, regarding the url scanner providing linked thumbnail images: Artwork images have a link to the reference photo in their Image Caption and this generates a thumbnail of the artwork on the photo image page. It has been reported that if the link on the artwork is changed, the original photo still shows a thumbnail of the artwork, months later.

What is the mechanism for resetting this kind of link so that the site shows current settings?

Right now I believe this is an automatic setting - it's checking I believe 100 URLs either hourly or daily - it's probably way too small to be able to keep up with the number of images on your site. I'll look into making that a configurable option.

Let me know if that helps.
brian
@brian
03/02/18 06:17:01PM
10,158 posts

Anyone Know What This Means.........
Using Jamroom

I have never seen this before - could just be malware bots "looking" for that file by scanning thousands of domains.
  72